The Watt Meter is designed to be safe in systems using less than 60 V and carrying currents up to 130A
Prevent peak currents damaging battery, motor control, motors, wiring and connectors
Verify sufficient operating voltage under load
Set cutoff voltages, check battery capacity & health
Balance battery cells
Confirm proper battery charger operation
Detect receiver and actual operating current so as to make sure whether an UBEC is needed
Operates from 4.8-60V
Size (L*W*T): 8.3cm x 4.2cm x 2.4cm/3.27"x1.65"x0.94"(approx)
Measures Range:
0 - 130A, resolution 0.01A
0 - 60V, resolution 0.01V
0 - 6554W, resolution 0.1W
0 - 65Ah, resolution 0.001Ah
0 - 6554Wh, resolution 0.1Wh
