Product name:2.4G 8CH D8 Mini FrSky Compatible Receiver with PPW/PWM/SBUS output
Product code:FR-312B
2.4G 8CH D8 Mini FrSky Compatible Receiver With PWM PPM SBUS Output
03-specification
The other similar receiver you may interesting!
DSCF1250 DSCF1254 DSCF1137
Description:
Description:
Item Name: Mini Compatible Receiver
Number of channels: 8CH
Output signal: 8-channel PWM output, PPM output, SBUS output
Supply voltage: 3.3-10V
Supply current: 25MA @ 5V
Distance: > 300 meters
Maximum size: 18 * 14MM
Weight: 1.1 g (with antenna)
Compatibility:
FrSky transmitter X9D/X9DPLUS/ X9E/ X12S/X7 in D8 mode
RF Module: DFT/DJT/DHT and XJT at D8 Mode
How To Bind:
Binding the receiver to the Frsky Taranis
In the Taranis, go to MODE SETUP (page 2) in the model configuration.
Go to Mode inside Internal RF and select D8.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Going back to the Taranis; we press BIND. The transmitter beeps, indicating it’s in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Exit the BIND mode in the Taranis.
Unplug the battery to turn off the receiver.
Binding the receiver to the XJT module
Using the dip switches of the XJT module, select the D8 mode. They should be in the following position: switch 1 = ON, switch 2 = OFF.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Press and hold the bind button and turn the transmitter on.
Release the button. A green light should blink in the module, indicating it’s in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Turn the transmitter off.
Unplug the battery to turn off the receiver.
