Packing List:
Avionic X-2 with CNC Case*1
GPS Module*1
10P 15cm Controller cable*1
3P 10cm Controller cable*1
3P 25cm controller cable*1
Adjust pen*1
Instruction manual*1
Back to Home,how airplane comes back?
When you connect the GPS module with Avionic X-2,it will check automatically the number of satellites and when the satellite number is over 7pcs,it will save your current location as home point and you can switch to this Mode.
When this mode is activated, the aircraft will maintain its current attitude and follow its path to return to its
initial starting point. Once it reaches the starting point, the aircraft will maintain a circling flight path around the location. The mode has a 77 meters safety attitude limit. If at any point the altitude drops below the 77 meters mark, the aircraft will automatically correct its flight path and climb back to 77 meters.
Fixed Path (Altitude/Direction) Mode
In this mode, aircraft’s altitude and direction will be locked and sustained. As the user releases the
directional stick, the aircraft will maintain the flight’s direction and altitude by autocorrecting any
external influences.This Mode also has a 77meters safety altitude limit and if your model drops below 77meters,it will climb back to 77meters
Balance Flight
It will automatically keep the airplane balanced,it will help you a lot in case of gusty wing,of course,if you are a starter,you can use this mode to pratice flight with lost of joy.
3D Stabilization
Stabilized assisted flight. Releasing the directional control will lock the current flight stance. Smooth
flight path and maneuvers can be easily achieved.
Manual Mode
Without any assistant.
Connection with receiver,ESC,Servo and GPS
LED Status,Gain Adjust,Mounting Direction and Lowest throttle Switch
