SIGLOMAX TECHNOLOGY CO.,LTD

                            SIGLOMAX TECHNOLOGY CO.,LTD
                                                        

                   
        
Location: Home >>Products
   Product Category
FPV Racing
Multi-copter
Flight Control
Camera/Monitor
Gimbal Series
5.8G AV TX/RX
Airplane
Helicopter
Motors
ESC Series
Chargers
Propeller
Tools
Simulator
Plug&Wire
Spares 
2.4G TX&RX
Screw/Pillar
CNC Parts
Stock Clerance
Lipo Battery Suction with XT60 Connector
Description
Product name:Lipo Suction for 3S/4S/5S/6S Battery
Product code:HSM-612T

Specifications:

This is a lithium battery discharger, which discharges  a lithium battery to between 3.9V and 4.0V, when you storage your battery
for a long-time, so the lithium battery will keep in good condition,suit for 3S,4S,5S and 6S battery.
 
 
Battery interface: XT60
 
Battery type: polymer lithium battery / lithium iron phosphate battery
 
Number of battery sections: 3S - 6S
 
Indicator status: LED
 
 
 
Instructions:
 
1. First determine the battery type and number of sections, and adjust the voltage level of the corresponding discharge by pressing the button. As shown in the table below
 
Number of battery sections
 
LED color
 
3S
 
blue
 
 
4S
 
green
 
5S
 
red
 
6S
 
Blue and green double flashing
 
 
 
2. As long as the LED light is on, it means the discharger is still in process.
 
    The LED light goes out and the discharge is completed.
 
 
 
Note: Since the arrester uses the resistance heat to dissipate excess power. Therefore, there is a "221" resistor on the discharger that is hot. Do not touch it with your hands to avoid burns.